出口型火災報警控制器 英文火災報警系統酒消防控制器

 

FACP-6000-1AB火災報警控制器（壁掛聯動型）

主要技術特性

電源：

交流電源(主電源)：額定工作電壓 ～220V （187～242V）

備用電源：根據不同點數，應配置不同容量的備用電源。

使用環境：

溫 度： 0℃～+42℃

相對濕度：≤95%，不凝露

容量：壁掛型、回路數: 2個回路 回路地址的最大用量:242點

顯示器：LCD液晶屏

外形尺寸：（長*寬*高）470mm*130mm*420mm

布線要求:

·485通訊線和報警總線最好使用雙絞線RVS2×1.0㎜2或RVS2×1.5㎜2,當環境干擾比較大時，485通訊線應考慮使用RVSP2×1.0㎜2的雙絞屏蔽線

·絕對不可將485通訊線和電話線與報警總線布在同一根多芯電纜中。

 

FACP-6000-1AB fire alarm controller (wall-mounted intermodal)

Main technical characteristics

Power supply:

Ac power (main power supply) : rated working voltage ~ 220V (187 ~ 242V)

Standby power supply: according to different points, alternate power sources should be equipped with different capacities.

Use environment:

The temperature: 0 ℃ ~ 42 ℃

Relative humidity: no more than 95%, no condensation

Capacity: wall hanging type, return number: the maximum amount of two loop return addresses: 242 points

Monitor: LCD LCD screen

Dimensions: (long * wide * height) 470mm * 130mm * 420mm

Wiring requirements:

· 485 communication line and alarm bus it is best to use twisted-pair RVS2 x 2 or 1.0 ㎜ RVS2 x 1.5 ㎜ 2, when the environment is larger, 485 communication line should consider using RVSP2 x 1.0 ㎜ 2 twisted-pair shielded wire

· no 485 communication line and telephone line and alarm bus are not in the same multi-core cable.