海外推薦英文型火災報警控制器全英文面板火警報警主機消防控制柜

 

FACP-6000-1AB火災報警控制器（壁掛聯動型）

主要技術特性

電源：

交流電源(主電源)：額定工作電壓 ～220V （187～242V）

備用電源：根據不同點數，應配置不同容量的備用電源。

使用環境：

溫 度： 0℃～+42℃

相對濕度：≤95%，不凝露

容量：壁掛型、回路數: 2個回路 回路地址的最大用量:242點

顯示器：LCD液晶屏

外形尺寸：（長*寬*高）470mm*130mm*420mm

布線要求:

·485通訊線和報警總線最好使用雙絞線RVS2×1.0㎜2或RVS2×1.5㎜2,當環境干擾比較大時，485通訊線應考慮使用RVSP2×1.0㎜2的雙絞屏蔽線

·絕對不可將485通訊線和電話線與報警總線布在同一根多芯電纜中。

 

FACP-6000-1AB fire alarm controller (wall-mounted intermodal)

Main technical characteristics

Power supply:

Ac power (main power supply) : rated working voltage ~ 220V (187 ~ 242V)

Standby power supply: according to different points, alternate power sources should be equipped with different capacities.

Use environment:

The temperature: 0 ℃ ~ 42 ℃

Relative humidity: no more than 95%, no condensation

Capacity: wall hanging type, return number: the maximum amount of two loop return addresses: 242 points

Monitor: LCD LCD screen

Dimensions: (long * wide * height) 470mm * 130mm * 420mm

Wiring requirements:

· 485 communication line and alarm bus it is best to use twisted-pair RVS2 x 2 or 1.0 ㎜ RVS2 x 1.5 ㎜ 2, when the environment is larger, 485 communication line should consider using RVSP2 x 1.0 ㎜ 2 twisted-pair shielded wire

· no 485 communication line and telephone line and alarm bus are not in the same multi-core cable.